The Dendro 4-Post Service lift is suitable for most heavy vehicles. The lifting technology is based on our self-sustaining screw/nut system in the same way as Dendro’s other lifters. This is a well proven design, known for its reliability and longevity.
Dendro Lift / Custom Lifts
Four-Post Lifts and Service Lifts for Heavy Vehicles
Robust, customised lifting systems for large and heavy vehicles.
Dendro Lift four-post lifts and service lifts provide safe, ergonomic access when servicing heavy vehicles, machinery and vehicle combinations. Standard solutions are available for loads between 20 and 50 tonnes, while systems for higher capacities can also be engineered.
Dendro Lift four-post lift for servicing heavy vehicles.
20–50 tonnes
Standard capacities, with higher-capacity solutions available.
Up to 100 tonnes
Tandem configuration for long and exceptionally heavy vehicle combinations.
Customised dimensions
Runway length and post spacing are designed around the vehicle and premises.
Technical Data
Standard capacity
20–50 tonnes
Capacity in tandem configuration
Up to 100 tonnes
Vehicle length in tandem configuration
Up to 25 m
Runway length and post spacing
Adapted to vehicle and premises
Track width
Adjustable via laterally movable runway
Synchronisation
Electronic
Installation
Floor-mounted or recessed
The runway length and distance between the posts are adapted to the vehicle dimensions and the customer’s workflow. The result is a robust service solution that uses workshop space efficiently and provides good access to the underside of the vehicle.
Adapted to Vehicle Dimensions and Track Width
Different vehicles require different runway arrangements, track widths and support surfaces. The geometry of the service lift is therefore adapted to the vehicles being maintained. One runway can be moved sideways when the lift is unloaded, allowing several track widths to be accommodated by the same lift.
For three-wheeled vehicles, the lift can be equipped with an additional support platform. The runway length, distance between the posts and ramp configuration are dimensioned to provide safe vehicle access and an efficient working area around the vehicle.
Adjustable track width
A laterally adjustable runway allows the unloaded lift to be adapted to different vehicles.
Additional support platform
Provides suitable support and load distribution when lifting three-wheeled vehicles.
Customised runways
Length and post spacing are designed around the vehicle dimensions and workshop conditions.
Tandem configuration
Tandem Lifts for Vehicle Combinations up to 100 Tonnes
In a tandem configuration, Dendro Lift service lifts can accommodate vehicle combinations up to 25 metres long and weighing up to 100 tonnes. Two interconnected lifts operate as one system to provide stable and controlled lifting movement.
The movable access ramp rises together with the runway. Vehicles are normally driven onto the lift from one side, but a second ramp can be added at the opposite end when drive-through access or a different workflow is required.
✓ Vehicle combinations up to 25 metres long
✓ Combined lifting capacity up to 100 tonnes
✓ Optional access ramps at both ends
✓ Electronically synchronised lifting movement
Self-Locking Lifting System with Electronic Synchronisation
The lifting movement is provided by a load-bearing nut and a connected safety nut that travel along the lifting screw in each post. The self-locking thread helps prevent unintended lowering, while the integrated brake provides precise and controlled stopping positions.
The runways rest on two heavy-duty crossbeams connected to the lifting nuts. Electronic synchronisation monitors the movement of the posts and keeps the runways level throughout lifting and lowering, even when the load is not distributed completely evenly.
Load-bearing and safety nuts
Provide robust and mechanically safe power transmission in each post.
Self-locking thread
Helps prevent the runways from lowering uncontrollably when the drive stops.
Electronic synchronisation
Keeps all lifting points at the correct level throughout the movement.
Floor-Mounted or Recessed Installation
The service lift can be installed directly on a flat, load-bearing floor or recessed so that the runways are flush with the workshop floor in their lowest position. A recessed installation provides completely level vehicle access and an open workflow around the lift.
Access ramps are used when the lift is installed above floor level. For forklift trucks and other vehicles with very low ground clearance, the ramps can be supplemented with an additional low-profile floor ramp.
Which Service Lift Is Right for Your Vehicle and Workshop?
We can help you determine the required capacity, runway length, post spacing, ramp configuration and installation method based on your vehicle dimensions and operational needs.
Other service lifts from Dendro Lift
Up to 2,500 kg
DSS2
Service lift for stackers and support-leg trucks, providing unrestricted access around the vehicle.
