Pallet jacks for 20000 kg 2.2m high to Boliden
Dendro has delivered 4 PB20 1300-2200T R4 to be used 1225 m below ground in a mine. These pallets jacks are continuously adjustable from 1300 mm to 2200 mm using a trapezoidal screw.
Dendro DSS2 lift to Norway
PostNord in Norway have received their first stacker lift: “It works really well. Make everyday life easier for us.” says their technian Stian Gjerdbakken
Upgrading lubrication system at Mörby train depot
Dendro has replaced the existing grease system with long hoses, leaking joints and unreliable grease feeding with Dendro’s reliable automatic lubrication with short hoses and few joints on 66 lifting jacks.
Mounting the grease system does not require any machining of the existing lift as it is attached with a very strong (85N) magnet
Dendro’s reliable automatic lubrication can replace manual procedures or unreliable solutions in a very simple way without the need to drill or thread into the existing equipment.
Dendro delivers DSS2 to Denmark
The week before this, Dendro visited danish Protruck for installation and education of personel operating our first truck lifts in the country.
The installation was, other than the first in a country, the first time a Hyster truck was lifted. As proven by the picture, Hyster’s trucks fits the lift perfectly. Another win for the DSS2!
We look forward to working more with Protruck, Hyster and future satisfied customers in Denmark.
Dendro Lift launches branded automatic lubrication system
Dendro Lift has launched a high-temperature lubricant specially adapted for our trapezoidal threaded screws that guarantee long life and trouble-free use. The grease is part of our automatic lubrication system which automatically applies the lubricant directly to the lifting nut for between 1-12 months, depending on need. The product is also gentle on the environment as it is prepared for separation of waste and recycling.
Upgrading existing pallets jacks with spring-loaded wheels
Kongsberg Maritime in Sweden granted Dendro the assignment to upgrade existing pallet jacks (blue) to improve the work environment and ergonomics.
Dendro has designed and delivered trolleys (yellow) with spring-loaded wheels so that the pallet jacks can easily move to where to be used.
When the load is applied, the wheels spring retracts and the pallet stands then firmly on the floor with its existing feet.
Dendro can develop this type of upgrade to most types of existing pallets.
Assembly and disassembly of subway car couplings
Dendro delivers two units to facilitate assembly and disassembly of couplers between SL metro cars to MTR Hammarbydepå. The unit consists of a coupling assembly table “KMB” and a lower part, a coupling assembly trolley “KMV”
KMB enables you to freely move the couplers in the XY direction and with a crank easily change the angle in such a way that you can fit the couplers screws into the holes in the subway car.
KMV makes it easy to raise and lower the KMB to the correct working height and to move the couplers with in the depot in a practical way.
Dendro Lift opens UK office
Dendro Lift continues its international expansion! On September 1st 2020, we opened a local sales office to handle the demand for our products from customers in the UK. We are proud to welcome Anthony Sullivan as a local sales manager to our international team. “We see the UK as an important future market for Dendro Lift and now we can finally offer local support.” says Mickey Petersson, European Sales Manager.
Four-pillar lift for Toyota Material Handling
The new lift can handle vehicles up to 20 tons and has a motorized adjustable driveway width.
Dendro Lift DSS2 to Israel
The BT / Toyota Material Handling Israeli distributor Danziv has chosen to invest in 4 pcs. Dendro DSS2 Lifts for Stackers and Pallet Trucks to make their service more efficient and to improve the ergonomics for their service technicians.
