X

Dendro Lift supplies roof platform for modern buses to Skövde municipality, Sweden

Västtrafik is to build a new bus depot in Timboholm in Skövde to handle their new electric buses that will be delivered in 2024. We are happy to share that Dendro Lift has been entrusted with delivering a roof platform manufactured by Pfaff-Silberblau to the new depot to create an efficient and safe workplace for service on bus roofs.

We are proud to be involved in the electrification of the buses in Sweden and this order confirms our position as a leading supplier of modern and customized roof platforms for buses in Northern Europe.

Safe and ergonomic preparation before and after galvanizing

Dendro has delivered two 6 ton lifts to Wibe in Mora, Sweden so that they can load and unload material for galvanizing in an ergonomic and safe way, as the load carrier frame can be easily adjusted in height both depending on the size of the material and the height of the operator.

The unique thing about this particular LB6 lift is that it’s unusually high and can handle large lateral forces in cases where you start loading heavy parts from one edge of the wide load carrier frame.

Unique jack stands for unique vehicles

Dendro Lift have delivered a larger series of jack stands for heavy combat vehicles that are safe, ergonomic and easy to handle, despite the fact that the sturdy jack stand must nominally handle 20 tons each.

Firstly, it is very easy to adjust the height of the almost 40 kg center post as it is balanced with gas springs. You can then easily lift the post with one hand before inserting the locking pin. Secondly, the jack stands have spring-loaded caster wheels so that you can easily move them on the floor. Thirdly, a collapsible pull handle is included which guarantees a safe working moment as you never have to be under the vehicle when placing the jack stand.

PB20 550 900 F4 is just one example of specially adapted jack stands that Dendro Lift has produced!

A third set of lifts to Emhart Glass

Dendro Lift has been trusted to deliver a third set of our mobile positioners to our repeat customer Emhart Glass in Sundsvall, Sweden. Previously, the customer used fixed supports, but with the lifts from Dendro Lift the work is easier as they can now adjust the working height. The customer uses these today to create an ergonomic and safe working position when assembling their machines.

At Dendro Lift, satisfied customers are important. Therefore, we are happy that our lifts has been so appreciated that a third set of specially adapted lifts has now been put into operation at our customer.

Dendro Lift hands over a new 30-ton four-pillar lift to Kubal

 After 40 years of faithful service, it was now time for Sweden’s largest aluminum smelter in Sundsvall to replace its well-used Dendro four-pillar lift with a new, modern 30-ton lift for servicing its large trucks. The new lift has been able to be mounted in the old fixings to minimize the need for adjustments to the premises. An important innovation is the step up which always automatically adapts to the height of the lift and provides easy access to the lifted vehicle. The lift is equipped with compressed air, freewheel lift from Nenab and modern LED lighting to create a good working environment.

Scania orders Dendro Lift roof platform

Together with Scania, we have been on a customer visit to showcase one of Dendro Lift’s unique roof platforms installed in Norrköping Bus Depot!

We are now pleased to announce that it is clear that we have been entrusted by Scania to deliver one of our roof platforms manufactured by Pfaff Verkehrstechnik to their test and development operations in Södertälje. Read more about Dendro’s specially developed and customized roof platforms here.

We look forward to helping Scania with their work for the vehicles of the future!

DSS2 continues to cross new country borders

Dendro Lift’s unique DSS2 lift has received a fantastic response internationally, and continues to cross new country borders! There is now at least one DSS2 installed in over 16 countries.

DSS2 is our revolutionary lift that both makes the job easier and increases safety when servicing stackers and pallet trucks.

The image with better resolution can be found here!

Dendro´s stationary lifting solutions in the heart of Stockholm’s metro system

We are proud that Dendro Lifts stationary lifting solutions are a part of the expansion of the Högdalen metro depot in Stockholm, Sweden!

An article from Dagens Nyheter tells how “it is called the heart of the new metro’s bloodstream – the giant train depot in Högdalen. It is now being expanded for just over 5 billion SEK in order to double capacity. ” In one of the pictures from the article, one of Dendro Lift’s subfloor lifts can be seen lifting a C20 trolley.

Success at the LogiMAT logistics fair

On the 31/5-2/6, Dendro Lift participated in the large European logistics fair LogiMAT in Stuttgart to showcase our unique DSS2 Stacker Lift.

We were pleasantly surprised by all the interest we received during these days, and the fantastic feedback. With potential new costumers from over 25 different countries, we look forward to an exciting time ahead for our unique DSS2 lift!

An entire container of DSS2 to Israel

It is a record year for our lifts for stackars and pallet trucks, the unique solution DSS2!

An additional 4 DSS2s have now been delivered to Toyota Material Handling in Israel, to continue to improve productivity, safety and ergonomics in the truck workshop of a multinational beverage manufacturer.

We see that those who have once started to use the DSS2 lift in their daily work soon realize what use they have of it and thus supplement with additional lifts.