Dendro Lift is proud to have delivered the new DSS3 model to KORDEL Antriebstechnik and looks forward to continuing the collaboration to meet their future needs in service and maintenance work.

The DSS3 is an upscaled version of the popular DSS2, and with its larger size, the DSS3 allows lifting of trucks up to 3 600 kg. The stronger and extended legs of the DSS3 also enable lifting of trucks with batteries located far from the forks.

For specifications of the new DSS3, please refer to the DSS3 product sheet.

Filed under: News by sebastian
Comments Off on Dendro Lift delivers the new DSS3 model for larger trucks

Filed under: News by erik
Comments Off on Dendro Lift Jacks stands for houses

To improve ergonomics and facilitate work with pallet jacks for high loads, Dendro has developed a gas spring option that balances out a large part of the post’s weight. On pallet jacks with a round post, this can be retrofitted.

Gas springs for balancing the weight of the center post are also available on new pallet jacks with a square post.e.

Filed under: News by nils
No Comments »

Do you have a DSS2 lift, or are you thinking of investing in one? We have several different additional products to meet the needs of our DSS2 customers.

Do you need to service newly manufactured stackers and forklifts? For servicing stackers where you want to be more careful not to scratch the forks when lifting the vehicle, we have developed the new option “Scratch Protection”.

Contact us at info@dendrolift.com if you want us to tell you more!

Filed under: News by alma
No Comments »

After a successful participation last year at LogiMAT, we are proud that Dendro Lift will participate again this year at the European logistics fair LogiMAT in Stuttgart which takes place between 24 and 27 April 2023. We will have our DSS2 stacker lift with us to show our visitors its unique characteristics.

In connection with the fair, we will launch a larger version of our successful DSS2 stacker lift, with a capacity to lift up to 3.6 tons. This is something that our customers with stackers and folklifts weighing more than 2.5 tons have been asking for in the market, and we are very excited about the opportunity to meet these needs.

If you happen to pass by the fair, visit us at LogiMAT and you can discover for yourself how easy it is to use our stacker lift for service and maintenance. We look forward to the opportunity to present our products to you and help solve your needs for safety and ergonomics in your workshop.

Filed under: News by alma
No Comments »

Västtrafik is to build a new bus depot in Timboholm in Skövde to handle their new electric buses that will be delivered in 2024. We are happy to share that Dendro Lift has been entrusted with delivering a roof platform manufactured by Pfaff-Silberblau to the new depot to create an efficient and safe workplace for service on bus roofs.

We are proud to be involved in the electrification of the buses in Sweden and this order confirms our position as a leading supplier of modern and customized roof platforms for buses in Northern Europe.

Filed under: News by erik
No Comments »

Dendro has delivered two 6 ton lifts to Wibe in Mora, Sweden so that they can load and unload material for galvanizing in an ergonomic and safe way, as the load carrier frame can be easily adjusted in height both depending on the size of the material and the height of the operator.

The unique thing about this particular LB6 lift is that it’s unusually high and can handle large lateral forces in cases where you start loading heavy parts from one edge of the wide load carrier frame.

Filed under: News by nils
No Comments »

Dendro Lift have delivered a larger series of jack stands for heavy combat vehicles that are safe, ergonomic and easy to handle, despite the fact that the sturdy jack stand must nominally handle 20 tons each.

Firstly, it is very easy to adjust the height of the almost 40 kg center post as it is balanced with gas springs. You can then easily lift the post with one hand before inserting the locking pin. Secondly, the jack stands have spring-loaded caster wheels so that you can easily move them on the floor. Thirdly, a collapsible pull handle is included which guarantees a safe working moment as you never have to be under the vehicle when placing the jack stand.

PB20 550 900 F4 is just one example of specially adapted jack stands that Dendro Lift has produced!

Filed under: News by alma
No Comments »

Dendro Lift has been trusted to deliver a third set of our mobile positioners to our repeat customer Emhart Glass in Sundsvall, Sweden. Previously, the customer used fixed supports, but with the lifts from Dendro Lift the work is easier as they can now adjust the working height. The customer uses these today to create an ergonomic and safe working position when assembling their machines.

At Dendro Lift, satisfied customers are important. Therefore, we are happy that our lifts has been so appreciated that a third set of specially adapted lifts has now been put into operation at our customer.

Filed under: News by alma
No Comments »

 After 40 years of faithful service, it was now time for Sweden’s largest aluminum smelter in Sundsvall to replace its well-used Dendro four-pillar lift with a new, modern 30-ton lift for servicing its large trucks. The new lift has been able to be mounted in the old fixings to minimize the need for adjustments to the premises. An important innovation is the step up which always automatically adapts to the height of the lift and provides easy access to the lifted vehicle. The lift is equipped with compressed air, freewheel lift from Nenab and modern LED lighting to create a good working environment.

Filed under: News by erik
No Comments »