Dendro Lift delivers container pallet stands to EnBW Kernkraft in Philippsburg, Germany.
Dendro Lift is proud to have delivered a total of 16 custom made 10-ton jack stands to EnBW Kernkraft in Germany.
Jack Stands for 30,000 kg with effortless height adjustment using Dendro Lifts gas spring option
We are proud to demonstrate how easy it is to adjust the height of the 50kg heavy center column of our jack stands that can handle an impressive 30 000kg, using our gas spring option. The jack stands are also equipped with a screw adjustable top for the fine tuning of the height. These jacks stands are now packed and ready for delivery via air freight to our customer in Abu Dhabi, UAE.
Dendro Lift is once again exhibiting at LogiMAT 2024 in Stuttgart
After a successful participation last year at LogiMAT, we are proud to announce that Dendro Lift will also be participating this year at the European logistics fair LogiMAT in Stuttgart, taking place between April 19 and 21, 2024. We will showcase our DSS2 truck lift, allowing visitors to experience its unique features firsthand.
If you happen to be in the area, visit us at the fair to discover how easy it is to use our truck lift for service and maintenance. We look forward to the opportunity to present our products to you and help address your needs for safety and ergonomics in the workshop.
Dendro Lift DSS2 Premium – Enhanced Truck Lift with New Features for Optimal Efficiency.
Revolutionize your forklift maintenance with the newly improved Dendro Lift DSS2 and its latest innovations. We now offer even better ergonomics, higher speed, and improved functionality to make service technology even smoother and more efficient.
The following features are included in the Premium package:
✨ DSS2-1800 – Higher Lift for Better Working Position:
Extended working height up to 1800 mm as standard to enable work in an even more ergonomic position. Now you can easily access the truck’s undercarriage and lower parts while standing.
⚡ High-Speed Lifting:
Discover a whole new level of efficiency with our extra high-performance motor. DSS2 lifts the forklift to service height 33% faster, i.e., to 1800 mm in less than 60 seconds.
? Dual 230V Power Outlets:
Get even more functionality directly at the workplace as it comes standard with two additional 230V outlets. Easily connect tools and electronics for smoother maintenance work.
?️ With newly included vinyl fork protection guards, the color of your trucks and forklifts is protected against scratches. Give your trucks extra protection and preserve their visual integrity.
? DSS2-Short means a reduced length of the lifting arm for easier access to the truck’s front wheels. With DSS2-Short, we enable easier and more efficient inspection and maintenance of the front wheels.
With the new Dendro Lift DSS2 Premium package, you get:
• ✔️ Ergonomic working position for increased productivity.
• ✔️ Faster lifts for more efficient maintenance processes.
• ✔️ Extra power outlets for a smoother working environment.
• ✔️ Protection and preservation of your new trucks’ paint with fork protection.
• ✔️ Customization options for optimal service access.
Take your forklift maintenance to the next level with Dendro Lift DSS2 Premium and its new innovative features.
Pallet jacks for modular houses
Moelven Byggmodul has purchased a total of 9 special pallet jacks to be used at three of their production facilities. The purpose of these pallet jacks is to facilitate access to the undersides of the modules. The pallet jacks are equipped with adapters in two different variants, depending on whether the modules have longitudinal or transverse battens in the floor. The adapters can be stored on the underside of the pallet jack when not in use.
In the picture, it is evident that there was eagerness to start using the pallet jacks, to the extent that the plastic from transportation had not even been removed.
Dendro Lift delivers Lifting jacks and Roof platforms to the new Sävenäs depot
Dendro lift has now completed the delivery of two lifting tracks with 16 25-ton lifts each to be able to lift all Västtrafik’s vehicle types that are serviced in the depot. The lifts have automatic positioning, which means that the operator selects the vehicle type and then all the lifting stands move on their own rails to the correct position.
As a complement to being able to lift the trains, we have also been trusted to deliver mobile roof work platforms to all four new track locations, a total of over 300 meters with telescopic extendable roof work platforms, so that work on the roof can be carried out both efficiently and safely.
More reading about the new depot:
Ny tågdepå i Säve från Jernhusen och Västtrafik.
Dendro Lift wins the Year’s Work Environment Award together with STARKA
Together with our customer STARKA Betongelement, we are awarded first prize in the category Work environment of the year 2023 at the industry event Betonggalan 2023.
The price is for the so-called “Brörosten” (The gignat Toaster) which is an innovative solution to improve the working environment when finishing large concrete elements.
See: Dendro Lift delivers unique finishing station to Starka
and Inauguration of Starka Betongelement in Arboga
We are very proud to have received this particular award as working environment, ergonomics and safety are central to all the products we deliver.
The gas spring option gets a heavy post of 20 ton pallet jack in perfect balance.
The advantage of the gas spring option in pallet jacks is that the, in this case over 40 kg, heavy pole can be easily handled with one hand. It is both ergonomic and reduces the risk of crushing injuries.
Lower and deeper Fork adapters
The new and improved fork adapters that is both lower and deeper give even better support especially for forks with big radius on the bottom side. This has been highly appreciated by our customers.
L2-1029 Fork adapter kit with magnet 30×135
DSS2-S optimized for trucks with short forks
Four DSS2 lifts with the innovative DSS2-S option have recently been installed at Still’s facilities in Germany.
The new DSS2-S option is a direct response to customers’ need for easy access to the front wheels of the truck. This has been achieved by reducing the length of the lifting anvil by 200 mm.
Through innovative design, the lifting capacity of 2,500 kg has been maintained despite the shorter lifting anvil.
