Custom jack stands
Dendro Lift manufactures custom jack stands for industry and vehicles where safety and performance are decisive. Our jack stands handle loads of up to 100 tonnes and can be tailored entirely to the customer's needs.
For better ergonomics, the jack stands can be fitted with gas springs that allow heavy centre columns to be adjusted smoothly in height – by hand alone.
To guarantee lasting safety, every jack stand is manufactured to Swedish rules and standards, including CE certification. They also meet the requirements of the Swedish Work Environment Authority and Nordtest. With a safety factor of up to 3, Dendro Lift’s jack stands offer both robustness and peace of mind – even in the most demanding environments.
- Dimensioned for your real loads
- Screw-adjustable height with fine increments
- Support surfaces matched to vehicle mounting points
- Swedish manufacturing with full documentation
Configure your jack stand
Choose type, height and load, and we will put together a proposal. The drawing is a simplified visualisation – the final design is verified by Dendro Lift.
Jack stand type
Height version
Dimensions
Can be specified from 200 mm. Dendro Lift verifies that the selected height combination is structurally possible.
Not all combinations of minimum and maximum height are possible. Dendro Lift verifies the selected height range before quoting.
Not all height ranges are possible. The final height range is confirmed by Dendro Lift.
Load per jack stand
Number of jack stands
Special requirements
Request a quote
Simplified rendering
Reference modelThe illustration is a conceptual visualisation only. Final design, load capacity, stability and dimensioning are verified by Dendro Lift before any quotation or order.
- Type
- Version
- Dimensions
- Load
- Quantity
- Gas springs
- Trapezoidal screw
- Special
Three-legged Jack Stands (5,000-80,000 kg)
Stable support placed close to the load. Equipped with retractable spring-loaded wheels and interchangeable top plates. Optional height adjustment.
Four-legged Jack Stands (5,000-80,000 kg)
Takes about 20% less floor space than equivalent three-leg models. Offers the same adjustability and replaceable top plates.
Fixed Height Jack Stands (up to 100,000 kg)
Extra heavy-duty stands with fixed height. Supplied with spring-loaded wheels as standard.
Double Jack Stand with Adjustable Height
Designed for broader and heavier loads. Adjustable in both height and length. Available with or without wheels.
Double Jack Stand with Fixed Height
Built to support large loads. Customizable in both height and length, with optional spring-loaded wheels and top plates.
Jack Stands with Trapezoidal Screw
Provides secure manual height adjustment. The self-locking design prevents unintended lowering.
Height-adjustable Jack Stands with Gas Spring
The gas spring allows easy height adjustment of heavy center posts with only manual force. Enables smooth height adjustment of heavy center posts using only manual force. An ergonomic solution that reduces pinch risk and improves the work environment.
Retracting Spring-loaded Wheels
These wheels allow for easy maneuvering and positioning. When the stand is loaded (approx. 20–100 kg), the base lowers securely to the floor. Swivel castors with brakes ensure the jack stand remains firmly in place. Intended for indoor use.
Custom Top Plates
The custom top plates can be interchangeable with tools for loads between 8 and 20 tons, but also fixed-mounted for high loads over 20 tons. The topplates have various customized shapes, includingrectangular flat, V-shaped, and round flat variants or adapted for ISO 1161 container standard. The top plates are reinforced and equipped with symbols for orientation.
Manufactured to current safety requirements
- CE marked to SS-EN 1494
- Maximum height: 4.5 × tipping radius (Rmin)
- Clear, hard-wearing plate stating the maximum load
- Floor loading at maximum load: max 2 MPa
- Safety factor 1.6 with no permanent deformation
- Safety factor 3 with no fracture or failure
- Tested at 3× rated load on a 10° incline
Designed in accordance with
- AFS 1998:8 — work in the motor trade
- SS-EN 1494+A1:2008 — lifting equipment
- Nordtest NT MECH 002
- KO PM 2005:08 — Swedish Consumer Agency, jack stands
Frequently asked questions about jack stands
General
Our jack stands are used to support and secure heavy loads during service, assembly, or storage in industrial and workshop environments.
Yes, all our jack stands are Swedish-made and designed for maximum safety and quality.
Yes, all Dendro Lift jack stands are CE-marked and manufactured according to Swedish regulations and standards. Capacity and Safety
Capacity and Safety
Our jack stands can handle loads from 1 ton up to 100 tons, depending on model and customer requirements.
They have a safety factor of 1.6 without residual deformation and 3.0 without breakage or failure.
Yes, they comply with AFS 1998:8, SS-EN 1494+A1:2008, Nordtest NT MECH 002, and the Swedish Consumer Agency/KO PM 2005:08. Design and Variants
Design and Variants
Our jack stands are built from heavy-duty steel structures designed to withstand extreme loads and demanding industrial environments. Each model is manufactured to Swedish standards and undergoes rigorous quality control to ensure stability, precision, and long service life.
Yes. Dendro Lift is one of the leading manufacturers of heavy-duty jack stands and lifting systems in the Nordic region. Our combination of Swedish engineering, safety focus, and customer-specific customization makes us the preferred choice for companies that demand reliable and robust equipment.
The jack stands are designed for very heavy loads – from 5 tons up to 100 tons – and are used in industries such as manufacturing, transport, energy, and maintenance where safety and stability are critical.
Yes, each jack stand is made to order. We can customize height, load capacity, materials, top plates, wheels, and surface treatment to meet your exact requirements.
Dendro Lift offers several models – three-legged, four-legged, fixed-height, and height-adjustable jack stands, as well as double stands for very heavy or wide loads.
Three-legged models provide excellent stability even on uneven surfaces and can be placed close to the object. They can be equipped with retractable spring-loaded wheels and interchangeable top plates for flexible handling.
Four-legged models require about 20% less space than three-legged versions of the same height, offering a compact solution while maintaining high strength and stability.
A double jack stand consists of two connected stands designed to support extra- wide or heavy objects. They can be delivered with either fixed or adjustable height and are tailored to the customer’s specific load and working environment.
Yes, we offer fixed-height models rated for up to 100 tons. They feature durable, reinforced top plates and can be fitted with retractable wheels for easier movement.
Height-adjustable jack stands allow you to easily modify the working height. They can be equipped with a trapezoidal screw or a gas spring for safe, ergonomic, and precise adjustment – even for very heavy loads.
Yes. Dendro Lift frequently develops custom solutions for specialized applications such as tractor servicing, inclined tank containers, and mounting pallets for heavy components.
The jack stands have a high safety factor and are tested to withstand three times the rated load at a 10° inclination without breakage or failure. They are built to remain stable even under extreme conditions.
Standard models are intended for indoor use, but we also provide specially designed versions with materials and surface treatments suitable for outdoor environments, such as galvanized finishes.
Yes, we can adapt height, top plates, and load distribution so that different types of jack stands work together in the same installation. Options and Customization
Options and Customization
Yes, we offer retractable spring-loaded wheels that make the jack stands easy to move. When loaded, the wheels retract so the stand rests firmly on the floor.
It’s a self-locking screw that enables smooth, precise manual height adjustment with maximum safety.
A gas spring allows for easy adjustment of heavy center posts with minimal manual effort, improving ergonomics and reducing the risk of pinching injuries.
Yes, we offer both interchangeable and fixed top plates in various shapes – such as flat, V-shaped, round, or according to ISO 1161 container standards.
Absolutely. All Dendro Lift jack stands are made to order and can be customized in terms of dimensions, material, load capacity, and design.
Yes, we provide customized jack stands for applications such as tractor service, inclined tank containers, and assembly of heavy components. Ordering and Contact
-
Lifts & DSS2
Eliminate hazardous lifts and streamline maintenance. Dendro Lift’s DSS2 offers safe, ergonomic truck lifting for stackers and pallet trucks—boosting workshop safety and cutting service times by up to 40%.
-
Train lifts
Minimize depot downtime with reliable rail lifting jacks. Dendro Lift’s modular, CE-certified systems combine over 50 years of Swedish engineering with proven precision for safe railway maintenance.
-
Roof Access Platform
Safe, ergonomic roof access for trains and buses. Developed with CMCO, Dendro Lift’s sensor-guided, extendable roof work platforms deliver certified fall protection without risk of vehicle damage.
-
Special lifts
From a few tons to hundreds of tons. Dendro Lift’s modular systems make it simple to tailor unique lifting jacks and positioners for heavy industry—engineered for safety and short lead times.
Every jack stand is made to order
Tell us the loads, heights and mountings you work with, and we will develop the right solution.